I have a setup in which there are two Nexus in redundancy and few 4500 connected to them. I am using VRF solution in which there are many subnets defined and the management subnets are only defined in management VRF.
Currently I am using cross VRF functionality in my core VDC so that my res VRF can communicate with managment VRF.
I also have an access list defined in the cross VRF connection to allow RES subnets to communicate with one particular server in office network , for echo-reply and between two res subnets.
Now for two subnets which are in RES VRF i have defined scope in my ip tool (QIP) and want to modify my access list to allow the DHCP requests/replies to flow. The DHCP clients will only communicate inside the "res" VRF, so the ACL does not need to allow any specific network traffic to/from these DHCP clients.
I want help in that. I am not able create this access list.