Nexus C93108TC-EX Port Monitor not working

[macgyver0099_1]

Hello,

We have a cisco Nexus9000 C93108TC-EX running NXOS: version 7.0(3)I4(7) where we can't get our port monitor to work.  Below are the configs.  Does anyone have any idea what we may need to add or take off?

interface Ethernet1/13
switchport
switchport access vlan 203

interface Ethernet1/12
switchport
switchport monitor
switchport access vlan 203

monitor session 1
source interface Ethernet1/13 both
destination interface Ethernet1/12
no shut

Nexus_Core1# sho monitor
Session State Reason Description
------- ----------- ---------------------- --------------------------------
1 up The session is up

[Reza Sharifi]

Hi,

it shows that the session is up. So, what is not working?

HTH

[macgyver0099_1]

We are unable to take a wireshark capture with it.  Is there something wrong with the configurations?

[Reza Sharifi]

Your config looks correct.

[Reza Sharifi]

What is the output of "sh monitor session 1"?

[balaji.bandi]

high-level config looks ok, i only suggest below removing vlan from switch port and test it

interface Ethernet1/12
switchport
switchport monitor
no switchport access vlan 203   <--remove this and try

no shutdown

also post new config and show monitor session 1 output as suggested.