we have a cluster of Fortigate. Each device is connected with LACP on 2 Nexus in VPC (3524-10GX). On the other side, they are connected with LACP on 1 Catalyst C4500.
On the Nexus, we have ESX servers, 3 on side A, 2 on side B, connected on etherchannel with vpc. From the admin desktop, we can reach these ESX with a simple ping,there is no problems.
But, when we tried to reach them on https, we have a lot of loss. So, we tried to ping them with the option " ping -l 1500", and we saw a lot of packets loss.
On the Nexus, if we change the speed of Port Channel 252 (look the attachment file) to 100MB FD, we have no problemeanymore. We used SFP copper from NExus side to connect the Fortigates, but with fiber SFP the problem persist.
For information, the lacp and port channel returns no errors, CRC, etc...
We tried to do the lacp on single Nexus, same problem and on a single Catalyst C9300, no problem.
So, is there any issues between Fortigate 100F hardware and Cisco Nexus ?
Hi, Is the port access or trunk mode? it has both config but which take precedence? What is the best command to verify? switchport access vlan 10switchport trunk encapsulation dot1qswitchport mode access
You have an extra week of fun! Capture the Flag has been extended through July 17. Register using the links below.
As a part of Cisco Live US auxiliary programs, we invite you to learn new technologies and obtain hands-on experience in a...
Hi,I'm trying to setup a cellular connection on my Cisco 1111 router.The interface is UP and it gets a private IPv4 and a public IPv6 address.If I try to send something on IPv4 through the cellular interface it works fine.But there seems to be an issue wi...
For an offline or printed copy of this document, simply choose ⋮ Options > Printer Friendly Page. You may then Print, Print to PDF or copy and paste to any other document format you like.