cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1442
Views
0
Helpful
3
Replies

Nexus1010 Did not receive supstate notification in 180 seconds. Still waiting

sokarlsson
Level 1
Level 1

After reboot due to powerfail our primary Nexus 1010 fails to boot. Output from console:

###################################################################

Auto booting bootflash:/nexus-1010-kickstart-mz.4.2.1.SP1.3.bin bootflash:/nexus-1010-mz.4.2.1.SP1.3.bin...

Booting kickstart image: bootflash:/nexus-1010-kickstart-mz.4.2.1.SP1.3.bin................................................................Image verification

OK

Starting kernel...

PCI: PIIX3: Enabling Passiv%H+¬)6%è¹

                                     ƒ00ñ.¬©íUsage: init 0123456SsQqAaBbCcUu

mkdir: cannot create directory `/new-root/old-root': File exists

INIT: version 2.85 booting

Bootflash device is /dev/hda

Checking all filesystems....r. done.

Setting kernel variables: sysctlnet.ipv4.ip_forward = 0

net.ipv4.ip_default_ttl = 64

net.ipv4.ip_no_pmtu_disc = 1

.

/etc/rc.d/rcS.d/S35iptables: line 41: //iptables: No such file or directory

/etc/rc.d/rcS.d/S35iptables: line 44: //ip6tables: No such file or directory

Loading system software

Uncompressing system image: bootflash:/nexus-1010-mz.4.2.1.SP1.3.bin

Load plugins that defined in image conf: /isan/plugin_img/img.conf

load_plugin: failed read swid map from "/mnt/pss/plugin_swid_map" with rc 0xffffffff. Plugin will be assigned new ID

Loading plugin 0: core_plugin...

load_plugin: Can't get exclude list from /isan/plugin/0/boot/etc/plugin_exclude.conf (rc 0x40ea0017)

plugin_link_to_exec_path: plugin_path = /isan/plugin/0, tar_log = /isan/plugin_extract_log/0

num srgs 1

0: swid-core-sup1sfp, swid-core-sup1sfp

num srgs 1

0: swid-sup1sfp-ks, swid-sup1sfp-ks

INIT: Entering runlevel: 3

Starting dhcpd daemon: dhcpdInternet Systems Consortium DHCP Server V3.0.1rc14

Copyright 2004 Internet Systems Consortium.

All rights reserved.

For info, please visit http://www.isc.org/sw/dhcp/

Wrote 0 deleted host decls to leases file.

Wrote 0 new dynamic host decls to leases file.

Wrote 0 leases to leases file.

Not configured to listen on any interfaces!

.

Exporting directories for NFS kernel daemon...done.

Starting NFS kernel daemon:rpc.nfsd.

rpc.mountddone.

/bin/mkdir: cannot create directory `/bootflash/repository': File exists

/isan/bin/mount_cppa_repository exist

2012 Feb 15 13:11:59 NTM-DC-VSA-01 %SYSLOG-2-SYSTEM_MSG: Did not receive supstate notification in 180 seconds. Still waiting

###############################################################################

Last message "%SYSLOG-2-SYSTEM_MSG: Did not receive supstate notification in 180 seconds. Still waiting "

Repeats 5-6 time every 180 seconds and then the appliance restarts by itself.

Do I need to reinstall?

3 Replies 3

sokarlsson
Level 1
Level 1

If anyone runs into this. I had to reinstall the Nexus 1010 software to resolve this.

Does anybody has another answer, because i have reinstalled it but i continue with this issue?????

SOKARLSSON, what number of version did you install??

Thanks !!!!

At that time I just reinstalled the primary with 4.2(1)SP1(3). Have you reinstalled from the ISO removing ALL config from the node that is not syncronizing?

Review Cisco Networking products for a $25 gift card