cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1285
Views
0
Helpful
2
Replies
Highlighted
Beginner

Nexus5K cannot use vrf for snmp server host

Helllo,

I'm trying to configure Nexus 5K to use vrf for snmp-server host, however hit the following error:

switch(config)# snmp-server host 10.1.1.111 traps version 2c public  udp-port 1163

switch(config)# snmp-server host 10.1.1.111 use-vrf management

No such SNMP Target configured.

When I use dummy ip, let say 1.1.1.1 I can successfully configure the above lines with no errors.

Any pointers why "use-vrf" is rejected?

Thanks

2 REPLIES 2
Highlighted

I am having the exact same issue. Osimonov1 have you found any solution to that? 

Highlighted
Beginner

Probably you call for using some kind of udp port in your already configured snmp-server host command: snmp-server host x.x.x.x traps version 2c <key> udp-port xx

When you want to assign this snmp-server host to vrf management you have to include those ports in your command: snmp-server host x.x.x.x use-vrf management udp-port xx

Content for Community-Ad