02-27-2019 08:32 PM
Hi,
I have a requirement to setup IGMP multicast mode on Nexus 9k switches to support Microsoft NLB.
I have gone through the article https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/9-x/multicast/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Multicast_Routing_Configuration_Guide_9x/b_Cisco_Nexus_9000_Series_NX-OS_Multicast_Routing_Configuration_Guide_9x...
and found out that "hardware profile multicast nlb" should be enabled on 9k switches to support IGMP multicast mode.
however, my switches don't support that command.
these are the options I have when I put that commnd.
(config)# hardware profile multicast ?
flex-stats-enable Enable real time stats
max-limit Maximum limit for multicast entries
rpf-check-optimization RPF Check optimization on Monticello ASIC
service-reflect Service-reflect settings
show version
Software
BIOS: version 07.64
NXOS: version 7.0(3)I7(5)
BIOS compile time: 05/17/2018
NXOS image file is: bootflash:///nxos.7.0.3.I7.5.bin
NXOS compile time: 8/28/2018 2:00:00 [08/28/2018 09:51:46]
Hardware
cisco Nexus9000 93180YC-EX chassis
Intel(R) Xeon(R) CPU @ 1.80GHz with 24633480 kB of memory.
Kernel uptime is 124 day(s), 22 hour(s), 9 minute(s), 9 second(s)
Last reset
Reason: Unknown
System version: 7.0(3)I7(5)
Service:
plugin
Core Plugin, Ethernet Plugin
Active Package(s):
Has anyone seen this kind of issue?
Thanks,
02-28-2019 02:02 AM
02-28-2020 12:43 PM
Were you able to resolve this issue?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide