02-27-2019 08:32 PM
Hi,
I have a requirement to setup IGMP multicast mode on Nexus 9k switches to support Microsoft NLB.
I have gone through the article https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/9-x/multicast/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Multicast_Routing_Configuration_Guide_9x/b_Cisco_Nexus_9000_Series_NX-OS_Multicast_Routing_Configuration_Guide_9x...
and found out that "hardware profile multicast nlb" should be enabled on 9k switches to support IGMP multicast mode.
however, my switches don't support that command.
these are the options I have when I put that commnd.
(config)# hardware profile multicast ?
flex-stats-enable Enable real time stats
max-limit Maximum limit for multicast entries
rpf-check-optimization RPF Check optimization on Monticello ASIC
service-reflect Service-reflect settings
show version
Software
BIOS: version 07.64
NXOS: version 7.0(3)I7(5)
BIOS compile time: 05/17/2018
NXOS image file is: bootflash:///nxos.7.0.3.I7.5.bin
NXOS compile time: 8/28/2018 2:00:00 [08/28/2018 09:51:46]
Hardware
cisco Nexus9000 93180YC-EX chassis
Intel(R) Xeon(R) CPU @ 1.80GHz with 24633480 kB of memory.
Kernel uptime is 124 day(s), 22 hour(s), 9 minute(s), 9 second(s)
Last reset
Reason: Unknown
System version: 7.0(3)I7(5)
Service:
plugin
Core Plugin, Ethernet Plugin
Active Package(s):
Has anyone seen this kind of issue?
Thanks,
02-28-2019 02:02 AM
02-28-2020 12:43 PM
Were you able to resolve this issue?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: