cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2825
Views
0
Helpful
2
Replies

no PoE on CAT4506-E with WS-X4548-GB-RJ45V

norbert alig
Beginner
Beginner

Hi all,

I got a CAT4506-E with the following setup:

test#sh module

Chassis Type : WS-C4506-E

Power consumed by backplane : 0 Watts

Mod Ports Card Type                              Model              Serial No.

---+-----+--------------------------------------+------------------+-----------

1     6  Sup 6L-E 10GE (X2), 1000BaseX (SFP)    WS-X45-SUP6L-E          JAE161900EK

2    48  10/100/1000BaseT (RJ45)                WS-X4548-GB-RJ45                JAE160500V7

3    48  10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4548-GB-RJ45V  JAE161201Y5

M MAC addresses                    Hw  Fw           Sw               Status

--+--------------------------------+---+------------+----------------+---------

1 5057.a89f.6f00 to 5057.a89f.6f05 3.0 12.2(44r)SG1 15.0(2)SG4            Ok

2 c464.138b.2d10 to c464.138b.2d3f 2.6                                                       Ok

3 f0f7.555a.4f80 to f0f7.555a.4faf 5.1                                                             Ok

On module 3, there is no PoE available.

test#show power inline module 3

Available:0(w)  Used:0(w)  Remaining:0(w)

Interface Admin  Oper            Power(Watts)     Device              Class

                            From PS    To Device

--------- ------ ---------- ---------- ---------- ------------------- -----

Gi3/1     auto   off        0.0        0.0        n/a                 n/a

Gi3/2     auto   off        0.0        0.0        n/a                 n/a

Gi3/3     auto   off        0.0        0.0        n/a                 n/a

Tried another Slot, another supervisorcard -> the same issue.

Here the power details:

test#show power detail

Power                                             Fan      Inline

Supply  Model No          Type       Status       Sensor   Status

------  ----------------  ---------  -----------  -------  -------

PS1     PWR-C45-1400AC    AC 1400W   good         good     n.a.

PS2     PWR-C45-1400AC    AC 1400W   good         good     n.a.

Power supplies needed by system    : 1

Power supplies currently available : 2

Power Summary                      Maximum

(in Watts)              Used     Available

----------------------   ----     ---------

System Power (12V)        440        1360

Inline Power (-50V)         0           0

Backplane Power (3.3V)      0          40

----------------------   ----     ---------

Total                     440        1400

                             Watts Used of System Power(12V)

Mod   Model                 budgeted instantaneous  peak   out of reset  in reset

----  -------------------   -------- ------------- ------  ------------  --------

1    WS-X45-SUP6L-E           200         --        --        200         200

2    WS-X4548-GB-RJ45          60         --        --         60          25

3    WS-X4548-GB-RJ45V         60         --        --         60          25

--   Fan Tray                 120         --        --        --          --

-------------------------   -------- ------------- ------  ------------  --------

       Total                   440         --        --        320         250

                        Watts used of Chassis Inline Power (-50V)

                        Inline Power Admin  Inline Power Oper

Mod   Model                PS     Device       PS     Device     Efficiency

----  -------------------  ----------------    ----------------    ----------

1    WS-X45-SUP6L-E           -        -          -        -           -

2    WS-X4548-GB-RJ45         -        -          -        -           -

3    WS-X4548-GB-RJ45V        0        0          0        0          89

-------------------------  ----------------    ----------------    ----------

       Total                   0        0          0        0

Who has any idea?

Thanks,

Norbert

1 Accepted Solution

Accepted Solutions

rtjensen4
Enthusiast
Enthusiast

Your power supplies do not support PoE. Check it out here:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/product_data_sheet09186a00801f3dd9.html

and just find your power supply model number.

Ordering Information

To place an order, visit the Cisco Ordering homepage or refer to Tables 12 through 14.

Table 12. Cisco Catalyst 4500 Power-Supply Ordering Information

Part Number

Product Name

PWR-C45-1000AC

Cisco Catalyst 4500 1000 WAC Power Supply (Data Only)

PWR-C45-1400AC

Cisco Catalyst 4500 1400 WAC Power Supply (Data Only)

View solution in original post

2 Replies 2

rtjensen4
Enthusiast
Enthusiast

Your power supplies do not support PoE. Check it out here:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/product_data_sheet09186a00801f3dd9.html

and just find your power supply model number.

Ordering Information

To place an order, visit the Cisco Ordering homepage or refer to Tables 12 through 14.

Table 12. Cisco Catalyst 4500 Power-Supply Ordering Information

Part Number

Product Name

PWR-C45-1000AC

Cisco Catalyst 4500 1000 WAC Power Supply (Data Only)

PWR-C45-1400AC

Cisco Catalyst 4500 1400 WAC Power Supply (Data Only)

Cisco-4500#sho env
no temperature alarms


Module Sensor Temperature Status
------+--------------------------+--------------------+------------
3 air inlet 21C (51C,65C,68C) ok
3 air outlet 31C (69C,83C,86C) ok
4 air inlet 20C (51C,65C,68C) ok
4 air outlet 29C (69C,83C,86C) ok

Power Fan Inline
Supply Model No Type Status Sensor Status
------ ---------------- --------- ----------- ------- -------
PS1 PWR-C45-2800AC AC 2800W good good good
PS2 PWR-C45-2800AC AC 2800W good good good

Power supplies needed by system : 1
Power supplies currently available : 2

Chassis Type : WS-C4507R-E

Power consumed by backplane : 40 Watts

Switch Bandwidth Utilization : 0%

Supervisor Led Color : Green

Module 1 Status Led Color : Green
Module 2 Status Led Color : Green
Module 3 Status Led Color : Green
Module 4 Status Led Color : Green
Module 5 Status Led Color : Green

Fantray : Good
Fantray removal timeout : 30

Power consumed by Fantray : 135 Watts

 

 

 

(Still no power,)

 

 

Help

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: