cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
966
Views
0
Helpful
2
Replies
Highlighted
Beginner

No web access since using VLAN (SGE2000)

Hello,

Using one SGE2000 switch.

I'm unable to access the switch web interface since I assigned a PVID to the port where my computer is connected.

If I use the PVID 1 and untagging the VLAN 1, it works fine.

What can I do to access the web interface with another VLAN ?

Everyone's tags (3)
2 REPLIES 2
Beginner

No web access since using VLAN (SGE2000)

1. add vlan, for example with id 2.

2. add ip address in vlan 2.

3. port which connected to your computer must be vlan 2 native mode acces, all trafic trought out from this port will untaged.

use command

switchport mode access

or

encapsulation dot1q 2 native

Beginner

No web access since using VLAN (SGE2000)

I missed the "Management VLAN" option in the "IPv4 Interface" page. Now it's fine !

Thanks.

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards