Hello everyone, I've got a question about power supply noise caused by this device, supposed to be ... silent ;-)
When powered, the SMPS (Switched Mode Power Supply) is very audible, exhibiting a random noise (like arcing). This is my first PoE compact switch, and I'm a bit surprised to hear such noise when all others compact devices (WS-C2960CG) remain absolutely silent.
Please note that there is no load connected, that may be the cause of the noise (I suspect pulse benching).
If someone among you has already deployed these specific devices (2960C-12PC) thanks to give me your feedback about noise.
i have l3 switch the cisco catalyst 3560g which has name "Cisco 3560g", like picture attached. i tryed that use vlan 1 on them for management of this switch from workstations 'dri-ns' and 'dri-pc' but when i tryed that teleneting on them i cant from both ...
Currently when changing the Authentication Template under the Onboarding section, there is no choice but to remove SGTs, VNs and IP Pools which clearly disrupt existing services.
Hitless Authentication was introduced in Cisco DNA Center 1.3...
Hi, I want to redistribute OMP routes to BGP, i have the doubt if all of the OMP prefixes located in the local vEdge will be redistributed to BGP or just the connected+static networks located in the vEdge. Also how can i restrict some OMP prefix...
Let's say we have two routers configured as RP candidates for auto-RP: R1 - "advertising" its loopback0 interface IP address 220.127.116.11 as the RP for these groups:18.104.22.168/3222.214.171.124/32126.96.36.199/24188.8.131.52/16 R2 - "advertising" its loopback0 int...