cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
643
Views
4
Helpful
4
Replies

Nortel 5520 switch

Eddie Rodriguez
Cisco Employee
Cisco Employee

    Hi,

I have a customer that wants to change their Nortel 5520 switches to a Cisco solution, and I wanted to ask what would be a good solution for this customer. presently they have 4 48 port PoE and 2 24 port PoE stackable 5520, and they are interested in redundant power supplies for the switches. I was thinking that the 3750 is good for this site but I would appreciate any feedback.

Thanks             

4 REPLIES 4

acampbell
Advocate
Advocate

Eddie,

The 3750X series has both stacking and capability for power redundancy.

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/data_sheet_c78-584733.html

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.

Thanks Alex.

Eddie,

Also depending on whether the 5520s are Layer3 or layer2.

You may be able to reduce costs if layer2 only by looking at the 2960 series

http://www.cisco.com/en/US/partner/products/ps6406/index.html

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.

Leo Laohoo
VIP Community Legend VIP Community Legend
VIP Community Legend
You may be able to reduce costs if layer2 only by looking at the 2960 series

Unfortunately, the 2960S does not have redundant power supplies.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: