Not available command "ntp access-group" on nexus 5000

[Saknarin Chimthasut]

Hi All,

We need to configuration  NTP access restrictions by apply command ntp access-group in nexus 5596UP (running version 6.2.x) but it not available inside ntp sub-command regarding ducument below;

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/system_management/6x/b_5500_System_Mgmt_Config_6x/b_5500_System_Mgmt_Config_6x_chapter_010010.html#task_B61435A7608D4FDBAA43AC77C8C0B76D

Please advise me.

Thanks.

[jkilleda]

Hello Saknarin,

Not available command "ntp access-group" on nexus 5000
Apply ntp distr command and then use other NTP commands.

[sbhadrav@cisco.com]

Are you looking for this:

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5500/sw/system_management/6x/b_5500_System_Mgmt_Config_6x_chapter_010010.html#task_B61435A7608D4FDBAA43AC77C8C0B76D