NTP ACL Nexus 5548UP

[scott.samra]

Hello,

I am unable to find a command similar to the "ntp access-group" command available in Nexus 7000s.  What is the command for Nexus 5548s?

Thank you,

Scott

[Reza Sharifi]

Hi

are you looking for this:

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5500/sw/system_management/6x/b_5500_System_Mgmt_Config_6x_chapter_010010.html#task_B61435A7608D4FDBAA43AC77C8C0B76D

HTH

[scott.samra]

Yes, that is exactly what I'm looking for, but that command is not available on my switch:

n5k(config)# ntp ?

  abort               Abort the ntp configuration

  authenticate        Enable/Disable authentication

  authentication-key  NTP authentication key

  commit              Commit the ntp configuration

  distribute          Enable NTP configuration distribution

  logging             Enable/Disable logging of NTPD Events

  peer                NTP Peer address

  server              NTP server address

  source              Source of NTP packets

  source-interface    Source interface sending NTP packets

  trusted-key         NTP trusted-key

Running version:  6.0(2)N1(2a)

[Reza Sharifi]

If I remember correctly, for NTP, you may have to enable "ntp distr" before you can apply other commands.

[scott.samra]

It turns out this is a new feature in NX-OS 6.0(2)N2(1); I upgraded to this newer code and applied the ntp access-group configuration.  Thank you for your fast responses.