Has anyone used the 'novolley' keyword for NTP?
The docs say it exists as of 12.4(T).
I've tried on multiple routers and multiple different releases of IOS and none of them include the 'novolley' keyword.
Has it been removed and the documentation not updated?
ntp broadcast client
To configure a device to receive Network Time Protocol (NTP) broadcast messages on a specified interface, use the ntp broadcast client command in interface configuration mode. To disable this capability, use the no form of this command.
ntp broadcast client [novolley]
no ntp [broadcast [client]]
Syntax Description
http://www.cisco.com/en/US/docs/ios/netmgmt/command/reference/nm_10.html