Hello all,
We have the problem that MPLS labled packets are not beeing processed on EHWIC-1GE-SFP-CU if L3PDU + Shim-Header exceeds 1500 bytes
When we move the config exactely to the onboard Interface Gi0/0 it works withoput any problems.
Connection like this:
(MPLS-Network) --- Cisco7301 Gi0/2.1202 --- (P2P-VPLS-Link) --- Gi0/0/0.1202 Cisco2921
Config like this:
Router#sh run | i ^mpls ldp|path-mtu
mpls ldp explicit-null
mpls ldp graceful-restart
mpls ldp tcp pak-priority
mpls ldp session protection
mpls ldp advertise-labels for acl-mpls-ldp-advertise
ip tcp path-mtu-discovery
mpls ldp router-id Loopback0 force
Router#
Router#sh run int GigabitEthernet0/0
Building configuration...
Current configuration : 179 bytes
!
interface GigabitEthernet0/0/0
mtu 1532
no ip address
carrier-delay msec 500
duplex auto
speed auto
media-type rj45
end
Router#sh run int GigabitEthernet0/0/0.1202
Building configuration...
Current configuration : 511 bytes
!
interface GigabitEthernet0/0/0.1202
description CPE Gi0/2.1202
bandwidth 10000
encapsulation dot1Q 1202
ip address 192.168.1.1 255.255.255.252
no ip proxy-arp
ip router isis
mpls traffic-eng tunnels
mpls traffic-eng administrative-weight 9
mpls ip
bfd interval 300 min_rx 300 multiplier 3
isis network point-to-point
isis metric 10000
isis hello-interval 3
isis csnp-interval 10
ip rsvp bandwidth
end
Router#
Thanks in advance !
Emanuel
