I have a question about the operation of an IE4000 (IE-4000-4TC4G-E)
The devices become very warm, even hot. The socket assumes such a temperature that you can hardly touch it any longer and when reading it a value of over 60°C is displayed. Is there any experience with this device, is this temperature normal? So far the devices run practically in idle mode.
short description of test setup
Two IE4000 and two IE4010 as a small network, lying on a laboratory table. The room is at room temperature. The devices are connected via RJ45. Although networks are configured, no clients are connected yet. The devices are connected via the supplied power supply units (PWR-IE65W-PC-DC=). A direct connection to 48V DC was also tried out. There was no noticeable change