10-26-2012 06:44 AM - edited 03-07-2019 09:42 AM
hi,
i have a trinagle network B and C are connected to A ,a has static default route to isp,while ospf is configured on all three ,b and c does not generate acandidate default routein theirrouting table.Here all links are 34 mb,i.e.
A
34 / \34
B--------C
34
kindly help.
Solved! Go to Solution.
10-26-2012 06:56 AM
Hi,
to generate a default route into OSPF you must use the command default-information originate.
Regards.
Alain
Don't forget to rate helpful posts.
10-26-2012 06:58 AM
Are you asking how to generate a route for ospf to pass to neighbors B and C? If you have a static default on A, under A's routing process type in "default-information originate".
HTH,
John
10-26-2012 06:56 AM
Hi,
to generate a default route into OSPF you must use the command default-information originate.
Regards.
Alain
Don't forget to rate helpful posts.
10-26-2012 06:58 AM
Are you asking how to generate a route for ospf to pass to neighbors B and C? If you have a static default on A, under A's routing process type in "default-information originate".
HTH,
John
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide