cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1116
Views
0
Helpful
2
Replies
Highlighted
Beginner

OTV - Removing 1 extended vlan ONLY

Hello,

Is there a way to remove 1 extended VLAN only without removing all the extended vlans?

When issuing :


N7K(config-if-overlay)#no otv extend-vlan nn

This command removes all the extended vlans and I couldn't find any command similar to "allowed vlan remove".

Is there a command that allows for selected vlan removal?

Looks like a serious caveat when it comes to operating OTV in a production environment.

Regards,

Thibault.

2 REPLIES 2
Highlighted
Beginner

Re: OTV - Removing 1 extended vlan ONLY

Hi,

You can do the following:

N7K(config-if-overlay)# otv extends-vlan 2,5-34  (remove the vlan you don't want, e.g vlan 3 & 4 are not extended)

Just extend vlans you want to.

Hope this helps

A Raaz
Highlighted

!# USE BELOW TO REMOVE THE

!# USE BELOW TO REMOVE THE VLAN FROM OTV INTERFACE

interface Overlay1

   otv extend-vlan remove 10

-----

otv extend-vlan {add | remove } vlan-range

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/OTV/config_guide/b_Cisco_Nexus_7000_Series_NX-OS_OTV_Configuration_Guide/b_Cisco_Nexus_7000_Series_NX-OS_OTV_Configuration_Guide_chapter_011.html#task_4AD54DD4872E44F68D449808E4BCA818

CreatePlease to create content
Content for Community-Ad