07-11-2012 10:20 PM - edited 03-07-2019 07:44 AM
We are seeing counter errors on switchports.
sho int gig1/4 counter errors
Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize OutDiscards
Gi1/4 0 0 0 0 0 18556248
Port Single-Col Multi-Col Late-Col Excess-Col Carri-Sen Runts Giants
Gi1/4 0 0 0 0 0 0 0
Port SQETest-Err Deferred-Tx IntMacTx-Err IntMacRx-Err Symbol-Err
--------------------------------------------------------------------------------------------------------------------------------------------------------
Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize OutDiscards
Gi1/26 0 0 0 0 0 5752272
Port Single-Col Multi-Col Late-Col Excess-Col Carri-Sen Runts Giants
Gi1/26 0 0 0 0 0 0 0
Port SQETest-Err Deferred-Tx IntMacTx-Err IntMacRx-Err Symbol-Err
Gi1/26 0 0 0 0 0
Here is the configuration on the ports. Can the speed and duplex causing the outdiscards error?
interface GigabitEthernet1/4
switchport
switchport trunk encapsulation dot1q
switchport trunk native vlan 201
switchport mode trunk
switchport voice vlan 202
no ip address
speed 100
duplex full
mls qos trust dscp
spanning-tree portfast
!
07-11-2012 11:26 PM
Hi
Can be Too much Traffic . If you have more them 100 mbit xmit Traffic The switch has to drop packets this will result in diaconnected sessions.
Sent from Cisco Technical Support iPhone App
07-12-2012 04:25 AM
Thanks Marc.
The hosts connected to the interfaces are just thin clients. is this a possible issue of broadcast storms?.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide