PA-MC-8T1 not working

[yogi]

I have a C6509NEB Sup1/MSFC1 that we just switched from hybrid to native mode. Loaded c6sup11-pk2s-mz.121-27b.E.bin

From best I can tell this should be supported.

Error - Card in slot 7 is unsupported. The image for the card is not bundled in image.

Any help would be appreciated.

[drolemc]

The problem may cause two reasons.

1. Port Adapater is not working

2. Memory leak on some sort with that image

solution is upgrade the image