Packet: [ERROR] TenGigE0/0/2/1.1555: This interface is not ready to establish PPPoE sessions on

[wilsonribeiro]

Hello,

I'm looking to understand what is real meaning of this error. What am I missing?

IOS: 6.0.2

Router: ASR-9001-S

When I start pppoe request I got:

RP/0/RSP0/CPU0:ios#LC/0/0/CPU0:

Oct  3 10:39:07.447 : pppoe_ma[389]: TenGigE0/0/2/1.1555: I dst ffff.ffff.ffff src 6a12.0b26.8e99: len 42 0x110900000004010100000000000000000000000000000000000000000000000000000000000000000000

LC/0/0/CPU0:Oct  3 10:39:07.447 : pppoe_ma[389]: Packet: [ERROR] TenGigE0/0/2/1.1555: This interface is not ready to establish PPPoE sessions on

LC/0/0/CPU0:Oct  3 10:39:07.447 : pppoe_ma[389]: [PADI-Recv]: TenGigE0/0/2/1.1555 peer-mac 6a12.0b26.8e99

LC/0/0/CPU0:Oct  3 10:39:07.447 : pppoe_ma[389]: [PADI-Recv]:    vlan-id-outer 1555

LC/0/0/CPU0:Oct  3 10:39:07.447 : pppoe_ma[389]: [PADI-Recv]:   DROPPED - PPPoE not ready on this interface

LC/0/0/CPU0:Oct  3 10:39:12.451 : pppoe_ma[389]: TenGigE0/0/2/1.1555: I dst ffff.ffff.ffff src 6a12.0b26.8e99: len 42 0x110900000004010100000000000000000000000000000000000000000000000000000000000000000000

[Georg Pauwen]

What is the configuration of the interface ? Do you have 'pppoe enable group' configured ? With subinterfaces, dot1q or ISL encapsulation is usually required, do you have that configured ?

[wilsonribeiro]

Hello my friend,

I've this:

interface TenGigE0/0/2/1.1555

service-policy type control subscriber politicaPPP

pppoe enable bba-group mygroup

encapsulation dot1q 1555

!

[Georg Pauwen]

Hello,

both the license and the configuration of your interface look good, actually. The license would appear as 'active' if it would be used or checked out by an application.

http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r4-1/system_management/command/reference/b_sysman_cr41asr9k/b_sysman_cr41asr9k_chapter_01110.html#wp2464985844

What does the configuration of your bba-group 'mygroup' look like ?

[wilsonribeiro]

Hello,

I just had:

pppoe bba-group mygroup

!

Then, I tried to put:

pppoe bba-groupmygroup

sessions mac limit 10

!

And it worked!

Cheers :!

[wilsonribeiro]

Something I'm not sure if it is a problem:

RP/0/RSP0/CPU0:ios#show license

Mon Oct  3 11:15:49.148 UTC

FeatureID: A9K-BNG-LIC-8K (Slot based, Permanent) 

  Total licenses 2

  Available for use         2

  Allocated to location     0

  Active                    0

  Store name             Permanent

  Store index               1

    Pool: Owner

      Total licenses in pool: 2

      Status: Available     2    Operational:    0

I have this feeling it should appear as active? But I'm not sure how it works exactly.