cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
512
Views
0
Helpful
4
Replies

Packet Tracer - HSRP over Trunk Ports

pwiscott
Level 1
Level 1

Hi,

 

I am using PT 7.2.1 and am trying to emulate our 4500 core using 2 3650's. I understand I cannot use VRRP and the likes but was hoping I could use HSRP ?.

 

I have the 2 3650's trunked together using 2 interfaces and a port channel however HSRP does not seem to work, should it. ?

4 Replies 4

Mark Malone
VIP Alumni
VIP Alumni
Hi
I dont use that emulator but looks like it is supported , in what way is it not working , are you not getting standby/active
can you post the config from each switch take a look

Hello,

 

on a side note, I don't get an option for HSRP for IPv4 on a port channel interface on the 3650, so it doesn't seem to be supported on that device:

 

Switch#conf t
Switch(config)#ip routing
Switch(config)#interface port-channel 1
Switch(config-if)#standby 1 ?
ipv6 Enable HSRP IPv6

 

Shut down PT and start back up and launch scenario and it works !! 

 

Core_2#sh standby

Vlan41 - Group 41

State is Active

6 state changes, last state change 00:00:28

Virtual IP address is 10.50.41.1

Active virtual MAC address is 0000.0C07.AC29

Local virtual MAC address is 0000.0C07.AC29 (v1 default)

Hello time 3 sec, hold time 10 sec

Next hello sent in 0.678 secs

Preemption enabled

Active router is local

Standby router is 10.50.41.2

Priority 115 (configured 115)

Group name is hsrp-Vl4-41 (default)

Vlan42 - Group 42

State is Active

4 state changes, last state change 00:00:18

Virtual IP address is 10.50.42.1

Active virtual MAC address is 0000.0C07.AC2A

Local virtual MAC address is 0000.0C07.AC2A (v1 default)

Hello time 3 sec, hold time 10 sec

Next hello sent in 1.92 secs

Preemption enabled

Active router is local

Standby router is 10.50.42.2

Priority 115 (configured 115)

Group name is hsrp-Vl4-42 (default)

emulators can always be a bit buggy :)
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: