Packet Tracer Limitations

[AndreT_Li]

in ex mode can I do a show int status I've look at the help "?" and  didn't find it. Just want to know if I'm entering it right.

[AndreT_Li]

sorry I can't do a show int status

[killerjack]

The show interface status command is available in Cisco Packet Tracer 7.2.1 . It can be used on the Catalyst 2960 switch in privileged exec mode, not in user exec mode

Switch>enable
Switch#show interfaces status 
Port      Name               Status       Vlan       Duplex  Speed Type
Fa0/1                        notconnect   1          auto    auto  10/100BaseTX
Fa0/2                        notconnect   1          auto    auto  10/100BaseTX
Fa0/3                        notconnect   1          auto    auto  10/100BaseTX
Fa0/4                        notconnect   1          auto    auto  10/100BaseTX
Fa0/5                        notconnect   1          auto    auto  10/100BaseTX
Fa0/6                        notconnect   1          auto    auto  10/100BaseTX
Fa0/7                        notconnect   1          auto    auto  10/100BaseTX
Fa0/8                        notconnect   1          auto    auto  10/100BaseTX
Fa0/9                        notconnect   1          auto    auto  10/100BaseTX
Fa0/10                       notconnect   1          auto    auto  10/100BaseTX
Fa0/11                       notconnect   1          auto    auto  10/100BaseTX
Fa0/12                       notconnect   1          auto    auto  10/100BaseTX
Fa0/13                       notconnect   1          auto    auto  10/100BaseTX
Fa0/14                       notconnect   1          auto    auto  10/100BaseTX
Fa0/15                       notconnect   1          auto    auto  10/100BaseTX
Fa0/16                       notconnect   1          auto    auto  10/100BaseTX
Fa0/17                       notconnect   1          auto    auto  10/100BaseTX
Fa0/18                       notconnect   1          auto    auto  10/100BaseTX
Fa0/19                       notconnect   1          auto    auto  10/100BaseTX
Fa0/20                       notconnect   1          auto    auto  10/100BaseTX
Fa0/21                       notconnect   1          auto    auto  10/100BaseTX

Have a look on https://www.packettracernetwork.com/ if you need Cisco Packet Tracer labs or tutorials (basic switch setup explained on https://www.packettracernetwork.com/labs/lab1-basicswitchsetup.html )