I am having a problem with the 2504 WLC in packet tracer 7.2.2.0418. The issue is once I finish the initial setup and the wlc reboots, it never comes back up. I can't ping it, or connect via web address. I have verified connectivity before running the setup, and I have tried not changing the management address and leaving it as the default 192.168.1.1.
can you post the Packet Tracer project (.pkt) file ? I want to see if this happens on my PC as well...
ZIP the pkt file first, otherwise you cannot upload it...
after you hit 'Apply' and the configuration is saved and the WLC reboots, try open the web browser again and type:
Still a no go for me. Hmm, you encountered the same issue, but were able to resolve it by deleted the ether cable? I did try, I also tried connecting to other ports on the wlc.
I tried your original project again. I opened the web browser, finished the initial configuration, applied it, closed the browser, reopened it and typed the https address (make sure you use the IP address you have assigned during the initial configuration).
Thanks, after trying to go through the initial setup again I used vlan 1 in the config instead of the vlan I wanted to use for management. This fixed the issue.
Thanks for helping me brainstorm.
Hi @trilerian ,
I suggest you report the problem in this link: