Hello,
I have a Nexus 3548 with LAN BASE license; would like to PAT to an IP in pool or to interface.
I am pretty new to NX-OS; and older versions only supported 1:1 NAT. So, my queries are:
1> Does it support PAT?
2> Is the PAT configuration similar to IOS (ip nat inside, outside, create route-map for interesting traffic)?
3> Will be really helpful if an example with CLI is demonstrated (only if different from IOS)
Version:
system: version 6.0(2)A4(5)
Features:
sho feature | i enable
bgp 1 enabled
interface-vlan 1 enabled
lacp 1 enabled
lldp 1 enabled
nat 1 enabled
ntp 1 enabled
scheduler 1 enabled
sshServer 1 enabled
telnetServer 1 enabled