cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

362
Views
0
Helpful
1
Replies
Highlighted

PBR in Cisco 4503 Switches

Hi,

I want to send the traffic from specific source through specific interface & I configured the switch as below :

config# Interface gig1/2

config# description WAN_INTERFACE

config# ip address 14.140.17.66 255.255.255.252

config# Interface gig1/3

config# description WAN_INTERFACE

config# ip address 14.140.15.81 255.255.255.240

config# ip route 0.0.0.0 0.0.0.0 14.140.17.65

config# access-list 101 permit ip 14.140.15.80 0.0.0.15 any

config# route-map TEST

config# match ip address 101

config# match interface gig1/3

config# set ip next-hop 14.140.17.65

Now I want to apply this policy on interface gig1/3 but the command "IP POLICY ROUTE-MAP" is not available.

Please suggest, how to do this.

Thanks,

Balbeer

Everyone's tags (3)
1 REPLY 1
Beginner

PBR in Cisco 4503 Switches

Hello Balbeer,

Can you tell us the IOS image version that you have intsalled also more deitales about your Switch model

I saw on the interent that there are some IOS version of your switch dose not support PBR like the

12.2(25)SG the SupII+ will not work with the Enhanced (enterprise services)image which is required for PBR

Hope it will help

Ahmed Sonba

CreatePlease to create content
Content for Community-Ad