cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
1826
Views
0
Helpful
2
Replies
kamal kumar
Enthusiast

%PF_ASIC-SP-3-ASIC_DUMP-- Error for WISM

Hi Experts ,

Any informationabout such error messages . I tried googling but not much success .

Oct  1               17:14:07: %PF_ASIC-SP-3-ASIC_DUMP: [0:0x1D7]               ME_KR_TESTMUX_TESTMUX_OUT_DATA__0 = 0x8100086
Oct  1               17:14:07: %PF_ASIC-SP-3-ASIC_DUMP: [0:0x124]               ME_KR_KATX_CNT_TX_PKT = 0x0
Oct  1               17:14:07: %PF_ASIC-SP-3-ASIC_DUMP: [0:0x4D]               ME_KR_KDTX_CNT_PKT_UNICAST = 0x0
Oct  1               17:14:07: %PF_ASIC-SP-3-ASIC_DUMP: [0:0x4E]               ME_KR_KDTX_CNT_PKT_MULTICAST = 0x0
Oct  1               17:14:07: %PF_ASIC-SP-3-ASIC_DUMP: [0:0x4F]               ME_KR_KDTX_CNT_PKT_MACN = 0x0
Oct  1               17:14:07: %PF_ASIC-SP-3-ASIC_DUMP: [0:0x50]               ME_KR_KDTX_CNT_PKT_RECIRC = 0x0
Oct  1               17:14:07: %PF_ASIC-SP-3-ASIC_DUMP: [0:0x51]               ME_KR_KDTX_CNT_PKT_ZEROPSEL = 0x0

Its a 6500 switch with ( Centralized Forwarding Card WS-SVC-WISM-1-K9-D SAD141201FC  2.2    PwrDown ) The staus is power down for this card .

2 REPLIES 2
acampbell
Advocate

Kamal,

This is the best I could find:-

PF_ASIC Messages

This section contains protocol filtering messages.

PF_ASIC-3

Error Message    %PF_ASIC-3-ASIC_DUMP: [[dec]:[hex]] [chars] = [hex] 

Explanation    This message includes relevant ASIC counters that might help to diagnose the problem with the switching bus.

Recommended Action    Copy this message and the SWITCHING_BUS_IDLE message exactly as they appear on the console or in the system log. Contact your Cisco technical support representative with the output. Include this output along with SWITCHING_BUS_IDLE error message.

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.

Hi Alex,

Thanks for the response .

Actually this is similar to the output from " Output interpreter tool " . Its seems to me like ASIC failure for the module .. .