07-23-2019 06:54 PM
Hi Guys,
I am getting the following error while creating the trunk link between 3650 48 ps to 3560cx-12 ps switch
%PHY-4-SFP_NOT_SUPPORTED: The SFP in Gi0/11 is not supported
Have tried the commands but no luck, any suggestions ?
no errdisable detect cause gbic-invalid
service unsupported-transceiver
I am using the Cisco GLC-T in both the ports for trunk link.
Thanks,
Vish
Solved! Go to Solution.
07-23-2019 07:14 PM
Hi,
On the 3560CX you need IOS 15.2(5)E or later to support GLC-T
Have a look at this link:
https://tmgmatrix.cisco.com/?si=3560CX
HTH
07-23-2019 07:14 PM
Hi,
On the 3560CX you need IOS 15.2(5)E or later to support GLC-T
Have a look at this link:
https://tmgmatrix.cisco.com/?si=3560CX
HTH
07-23-2019 08:17 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide