Ping Problem

[C_G]

Good morning everyone, 

I created a small network(beginner), everything seems ok but I can't ping.

Can anyone please address me in the right direction to solve the problem?

Thanks in advance

[M02@rt37]

Hello @C_G 

On Switches 1 and 2 configure Gig0/1 like this:

On Router1 there is a mistake between Giga0/0/0 and 0/0/1 as concerned IP ADDRESS and the global confoguration also.

These interfaces have to be configured with sub-interfaces like this (note that I invert IP between interfaces also):

PC0 should be able to ping PC1 now.

[Georg Pauwen]

Hello,

what are the device passwords ? Can you unlock the logical view ?

[M02@rt37]

Hello @Georg Pauwen 

No need password

Clic first on config tab, select one interface, and go back to CLI !

[C_G]

Hi, unfortunately I can't, has being blocked by the tutor(just an exercise
not an assessment). The passwords are torinopiemonte for the line and
torinosecret for the secret.
Thanks
Giuseppe

[M02@rt37 · Accepted solution]

@C_G 

Do you modified as I suggested ?

[C_G]

Hi MO2, thanks very much for your help. 

Appreciated it 

[M02@rt37]

You're so welcome @C_G