I want to build an point- to – point local E-line carrier Ethernet services between IOS XRv routers using the link bundles. Once the two local EFPs linked with a point-to-point cross connect, the state of the cross-connect becomes up. But still the ping between CEs failed. what could be the problem?
Below are the output details of IOS XRv router confgiuration,
RP/0/RP0/CPU0:PE1#sh run | begin xconnect Tue Jan 16 18:26:15.215 UTC Building configuration... xconnect group test p2p test1 interface Bundle-Ether100 interface Bundle-Ether101 ! ! !
RP/0/RP0/CPU0:PE1#sh run int bundle-ether 100 Tue Jan 16 18:28:23.989 UTC interface Bundle-Ether100 l2transport ! !
RP/0/RP0/CPU0:PE1#sh run int bundle-ether 101 Tue Jan 16 18:28:27.894 UTC interface Bundle-Ether101 l2transport ! !
interface Bundle-Ether100 ipv4 address 10.10.10.1 255.255.255.0 ! interface GigabitEthernet0/0/0/3 bundle id 100 mode on ! interface GigabitEthernet0/0/0/4 bundle id 100 mode on
interface Bundle-Ether101 ipv4 address 10.10.10.2 255.255.255.0 ! interface GigabitEthernet0/0/0/5 bundle id 101 mode on ! interface GigabitEthernet0/0/0/6 bundle id 101 mode on !
Inviting all network professionals in operations! We'd like to understand what would be valuable for you in a mobile application. Your response will help Cisco improve a product feature that could benefit you. Thanks!
Click here to take the sur...
Cisco’s software-defined wide area network (SD-WAN) solution allows user to quickly and seamlessly establish an overlay fabric to connect an enterprise’s data centers, branch and campus locations, as well as colocation facilities in order to imp...
1. Log into CLI of DNAC:
ssh maglev@< DNAC appliance IP> -p 2222
2. Run this curl command to get token to get member id:
curl -X POST -u admin:<admin user password> -H -V https://<CLUSTER-IP>/api/system/v1/identitymgmt/token
Enterprise Switching Business Unit is glad to announce Beta release 16.12.2 for all Catalyst 9200/9300/9400/9500/9600 and Catalyst 3650/3850 Platforms. This release is made available to allow users to test, evaluate and share fee...
Purpose of the document
This document describes the general recommendations or best practices when designing and deploying the Cisco SD-Access technology. The document assumes that the reader has a general overview of Cisco's SD-Access for Distributed C...