cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

570
Views
0
Helpful
0
Replies
Highlighted

policing on etherchannel ASR1002F

Hello everybody!

I have 6506 connected to asr 1002F like this:

6506:

interface GigabitEthernet2/2

description sgw-1

switchport

switchport trunk encapsulation dot1q

switchport mode trunk

no ip address

channel-group 3 mode active

end

!

interface GigabitEthernet5/1

description sgw-1

switchport

switchport trunk encapsulation dot1q

switchport mode trunk

no ip address

channel-group 3 mode active

end

!

interface GigabitEthernet6/1

description sgw-1

switchport

switchport trunk encapsulation dot1q

switchport mode trunk

no ip address

channel-group 3 mode active

ASR1002f:

interface GigabitEthernet0/0/0

no ip address

negotiation auto

channel-group 1 mode active

!

interface GigabitEthernet0/0/1

no ip address

negotiation auto

channel-group 1 mode active

!

interface GigabitEthernet0/0/2

no ip address

negotiation auto

channel-group 1 mode active

!

Now I create new clients on the router through

interface Port-channel1.555
description client1
encapsulation dot1Q 555
ip address x.x.x.x x.x.x.x

interface Port-channel1.556
  description client2
  encapsulation dot1Q 556
  ip address x.x.x.x x.x.x.x

I tried to limit the connection speed of the client through policing but with no success. Tried document "Quality of Service: Policies Aggregation" with no success too.

For example, tried the following:

class-map match-all BestEffort
  match any
!
policy-map aggregate-member-link
  class BestEffort service-fragment BE
    shape average 100000000
policy-map subscriber
  class class-default fragment BE
    shape average 100000000

interface Port-channel1.555
  description client1
  encapsulation dot1Q 555
  ip address x.x.x.x x.x.x.x

service-policy output subscriber

A get this:

show policy-map int port-c1.555
Port-channel1.555

  Service-policy output: subscriber

    Service policy subscriber is in suspended mode

I need help how to configure speed limiting with preservation of etherchannel.

Everyone's tags (3)
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards