10-30-2016 07:00 AM - edited 03-08-2019 07:58 AM
Hi,
Can i configure port channel using different 10 SFP model (SFP-10G-SR-S,SFP-10G-LR-S),
switch 1 gig0/1 (SFP-10G-SR-S) --------- Switch 2 gig0/1 (SFP-10G-SR-S)
switch 1 gig0/2 (SFP-10G-LR-S) --------- Switch 2 gig0/2 (SFP-10G-LR-S)
Thanks,
Solved! Go to Solution.
10-30-2016 07:42 AM
Hello,
the physical interfaces do not matter as long as the speed is the same. So your SFPs will work fine together in a port channel.
10-31-2016 03:51 AM
As a cautionary note - make sure the SR are connected with multimode fiber, and the LR are connected with Singlemode fiber (end to end, if you have intermediate fiber patch panels).
10-30-2016 07:42 AM
Hello,
the physical interfaces do not matter as long as the speed is the same. So your SFPs will work fine together in a port channel.
10-31-2016 03:51 AM
As a cautionary note - make sure the SR are connected with multimode fiber, and the LR are connected with Singlemode fiber (end to end, if you have intermediate fiber patch panels).
11-01-2016 05:04 AM
Thanks gpauwen and pwwiddicombe for the support
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: