cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

295
Views
0
Helpful
1
Replies
Highlighted
Beginner

Portable Redundant Power System for Catalyst Switches?

Does anybody know if a portable RPS device either from Cisco or another manufacturer exists, that would allow you to move primary power for a switch without causing an outage? I realize that for the Catalyst 3560 for example, you can get an RPS 2300 or 675, but my understanding is that these are made for a more permanent installation, not to mention rather costly. Thanks in advance for any tips.

EDIT: It looks like the RPS 675 is rather inexpensive after all, especially in the secondary market, but still rather large for toting around.

IMG_20120511_094629.jpg

1 REPLY 1
VIP Expert

Portable Redundant Power System for Catalyst Switches?

Disclaimer

The  Author of this posting offers the information contained within this  posting without consideration and with the reader's understanding that  there's no implied or expressed suitability or fitness for any purpose.  Information provided is for informational purposes only and should not  be construed as rendering professional advice of any kind. Usage of this  posting's information is solely at reader's own risk.

Liability Disclaimer

In  no event shall Author be liable for any damages whatsoever (including,  without limitation, damages for loss of use, data or profit) arising out  of the use or inability to use the posting's information even if Author  has been advised of the possibility of such damage.

Posting

If I remember correctly, the RPS will fail over from primary power to it but it requires (?) a reload to get to back on primary power.  I.e., if I'm correct, you'll still have an outage trying to move back to primary power.

CreatePlease to create content
Content for Community-Ad