cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
603
Views
0
Helpful
1
Replies

Portchannel bettween 6509 and 4506 does not come up after reloads.

h.kaemmerling
Level 1
Level 1

a 6509 and a 4506 with 2, 1gb interfaces in a portchannel.   Bring it up and everything is fine.  Save the config and reload either switch and the interfaces stay in Not Connected state.  Either doing a No Shut or a physical unplug the SFP and plug it back in will bring it up with no issues.  Interfaces do not go into Err Disabled state they stay in Not Connected like there is no fiber plugged into it.  No error mesages in the log.  The Just the Interface is now up.

Both are running very new code,

6509 - s2t54-ipservicesk9-mz.SPA.150-1.SY1.bin (  15.0.(1)SY1  )

4506 - Version 03.02.00.XO

Has anyone run into an issue like this?

1 Reply 1

Leo Laohoo
Hall of Fame
Hall of Fame

Kindly post the config of the interfaces and port channels of both the 6500 and the 4500.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco