cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
319
Views
0
Helpful
4
Replies
Highlighted
Beginner

problem connect server dl360p sfp newtwork adpter with GLC-T to switch 10/100

HI EVERY BODY 

I NEED HELP 

first apologize for my bad english

i have server hp dl360p with sfp network adpter  and my switch zmc 10/100

i need connect server with GLC-t  with rj45 cable to my swith but not working  

when I connect straight up the cable to laptop or pc ,working true 

please help me 

 

what should I do؟

download.jpg

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Advisor

Re: problem connect server dl360p sfp newtwork adpter with GLC-T to switch 10/100

that's a cisco sfp , it may be supported on those devices , you could try hardcode it , to lower speed if they only support 100mb
duplex full
speed 100
4 REPLIES
VIP Advisor

Re: problem connect server dl360p sfp newtwork adpter with GLC-T to switch 10/100

Hi
what type of switch cisco is it ?
Beginner

Re: problem connect server dl360p sfp newtwork adpter with GLC-T to switch 10/100

 


@Mark Malone wrote:
Hi
what type of switch cisco is it ?

no cisco switch 

the old swith type zmc 10/100

when connect cable to laptop directly every things work but when connect cable to switch or mikrotik or modem adsl not working?

VIP Advisor

Re: problem connect server dl360p sfp newtwork adpter with GLC-T to switch 10/100

that's a cisco sfp , it may be supported on those devices , you could try hardcode it , to lower speed if they only support 100mb
duplex full
speed 100
Beginner

Re: problem connect server dl360p sfp newtwork adpter with GLC-T to switch 10/100

 


@Mark Malone wrote:
that's a cisco sfp , it may be supported on those devices , you could try hardcode it , to lower speed if they only support 100mb
duplex full
speed 100

I think you're right

I'll check this out tomorrow with a switch 1000 duplex 

tank you so much

CreatePlease to create content
Ask the Expert- MPLS troubleshooting