04-25-2007 06:08 AM - edited 03-05-2019 03:40 PM
I'm having problems with IOS file (1700 series router), when i try boot the router with the new IOS appear this error:
*** System received a Software forced crash ***
signal= 0x17, code= 0x5, context= 0x0
PC = 0xbaddaddd, Vector = 0xbaddaddd, SP = 0xbaddaddd
how can i solv this?
04-26-2007 02:28 AM
Hi,
This KB article should point you in the right direction:
http://www.ciscotaccc.com/kaidara-advisor/core/showcase?case=K48918452
You said that you had tried loading a new IOS - I assume the router was working well before, so the most likely cause of this error is corrupt IOS image.
You can try downloading a new IOS image from Cisco.com. You will probably have to load this new IOS from ROMMON mode on the router. Please refer here for a how-to:
Hope this helps.
Oliver
05-22-2007 07:26 AM
Oliver
Thanks for your advice. I'll try.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide