interface GigabitEthernetx/0/x description To s switchport access vlan 794 switchport mode dot1q-tunnel l2protocol-tunnel cdp l2protocol-tunnel stp l2protocol-tunnel point-to-point pagp l2protocol-tunnel point-to-point udld no cdp enable spanning-tree bpdufilter enable
but int this real world, customer asked us to collapse the 2 switches in one switch (that is a cat 6509 with sup 3c in vss mode with 6748-ge-tx card).
Is it possible have the edge config in one port and the tunnel config in another port (may be also in another line card) and connect the 2 ports with a crossover cable ? In your opinion can this config be able to work ?
Do you use Cisco DNA Center? Have you used and are you willing to provide your feedback in using the Cisco DNA Center help and documentation?
If so, we’d like you to complete the survey linked below. Your feedback will help provide more effective and easi...
Listen: https://smarturl.it/CCRS9E18Follow us: https://twitter.com/CiscoChampion Reaching the height of your career is no simple feat. It often requires a combination of pursuing the right education, building the right professional network and being ...
In a typical production SD-WAN deployment, we would probably have many remote sites connected via many different Internet connections to a centralized data center or a regional hub. In most regions in the world, Internet providers will always use some typ...