Hello All,
I am in need of some asistance, I have searched for days one forums and Google and am unable to find a sample config that doesnt use autoqos.
I need to enable QOS on a 6513 that i am using as a access switch.( loaded with
WS-X6148-45AF). I am running SUP2MFSC2 with IOS and autoqos is not supported.
below is my IOS version and my requirements.
Requirements:
Trust CoS and DiffServ Value coming from Avaya equipments
DiffServ=46 for Audio and DiffServ=26 for Signaling
CoS=5 for Audio and CoS=3 for Signaling
I am running the following IOS:
IOS (tm) s222_rp Software (s222_rp-IPSERVICESK9_WAN-M), Version 12.2(18)SXF17b, RELEASE SOFTWARE (fc1)
Sample Port config:( Vlan 709 = Data,Vlan 809=VOIP)
switchport
switchport access vlan 709
switchport mode access
switchport voice vlan 809
no ip address
spanning-tree portfast
end
show mls qos
QoS is enabled globally
QoS ip packet dscp rewrite enabled globally
Input mode for GRE Tunnel is Pipe mode
Vlan or Portchannel(Multi-Earl) policies supported: Yes
Egress policies supported: No
----- Module [2] -----
QoS global counters:
Total packets: 33034
IP shortcut packets: 0
Packets dropped by policing: 0
IP packets with TOS changed by policing: 2349
IP packets with COS changed by policing: 30
Non-IP packets with COS changed by policing: 0
sho mls qos maps
Normal Burst Policed-dscp map: (dscp= d1d2)
d1 : d2 0 1 2 3 4 5 6 7 8 9
-------------------------------------
0 : 00 01 02 03 04 05 06 07 08 09
1 : 10 11 12 13 14 15 16 17 18 19
2 : 20 21 22 23 24 25 26 27 28 29
3 : 30 31 32 33 34 35 36 37 38 39
4 : 40 41 42 43 44 45 46 47 48 49
5 : 50 51 52 53 54 55 56 57 58 59
6 : 60 61 62 63
Maximum Burst Policed-dscp map: (dscp= d1d2)
d1 : d2 0 1 2 3 4 5 6 7 8 9
-------------------------------------
0 : 00 01 02 03 04 05 06 07 08 09
1 : 10 11 12 13 14 15 16 17 18 19
2 : 20 21 22 23 24 25 26 27 28 29
3 : 30 31 32 33 34 35 36 37 38 39
4 : 40 41 42 43 44 45 46 47 48 49
5 : 50 51 52 53 54 55 56 57 58 59
6 : 60 61 62 63
Dscp-cos map: (dscp= d1d2)
d1 : d2 0 1 2 3 4 5 6 7 8 9
-------------------------------------
0 : 00 00 00 00 00 00 00 00 01 01
1 : 01 01 01 01 01 01 02 02 02 02
2 : 02 02 02 02 03 03 03 03 03 03
3 : 03 03 04 04 04 04 04 04 04 04
4 : 05 05 05 05 05 05 05 05 06 06
5 : 06 06 06 06 06 06 07 07 07 07
6 : 07 07 07 07
Cos-dscp map:
cos: 0 1 2 3 4 5 6 7
------------------------------------
dscp: 0 6 16 26 32 46 48 56
IpPrecedence-dscp map:
ipprec: 0 1 2 3 4 5 6 7
------------------------------------
dscp: 0 8 16 24 32 40 48 56
Your help will be greatly appreciated.
Regards,
Brad
