Hi Experts,
I am facin issue with the switch were the counters are not been displayed under the show policy command.
Please find the output below;-
Switch1#sh policy-map interface
Vlan 10
Service-policy input: fa_usa
class-map: favoice (match-all)
Match: access-group name favoic
set dscp 46:
counters not available (install failure) ???(I dont see any counters here)
Were as I have the same setup at the other data center
and I am able to see the counters on that switch which is running the same software version.
Switch2#sh policy-map interface ( Working fine)
Vlan 20
SService-policy input: zain_usa
class-map: zainvoice (match-all)--Counters are seen,
Match: access-group name za_usa
set dscp 46:
Earl in switch 1, slot 4 :
0 bytes
5 minute offered rate 0 bps
aggregate-forwarded 0 bytes
Earl in switch 2, slot 4 :
0 bytes
5 minute offered rate 0 bps
aggregate-forwarded 0 bytes
Is this a bug?Software version 12.2(33)SXI runnin on Cat6500? Or any thing which I am missing that needs to be configured. (Conf on both th devices are same).
Any help on this would be highly appriciated.
Thanks
Fari
