cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
365
Views
0
Helpful
1
Replies

QOS for NX-7K.

mohan mayilraj
Beginner
Beginner

Hi,

Currently we are running QOS on CISCO 6K and We are migrating to NX-7K. I need help for understanding QOS and Configuration for NX-7k and explanation with QUEing.

Current 6K Config is given below.

interface GigabitEthernet6/28

logging event link-status

wrr-queue bandwidth 30 70

wrr-queue queue-limit 40 30

wrr-queue random-detect min-threshold 1 40 80

wrr-queue random-detect min-threshold 2 70 80

wrr-queue random-detect max-threshold 1 80 100

wrr-queue random-detect max-threshold 2 80 100

wrr-queue cos-map 1 1 1

wrr-queue cos-map 1 2 0

wrr-queue cos-map 2 1 2 3 4

wrr-queue cos-map 2 2 6 7

mls qos vlan-based

switchport

switchport access vlan XXX

spanning-tree portfast

spanning-tree bpdufilter enable

Thanks

Mohan

1 Reply 1

vmiller
Rising star
Rising star

Here is a start.

https://supportforums.cisco.com/docs/DOC-20595

I would read the QOS section of NX-OS config guide a few times. QOS can be quite a bit different that what you see and do in IOS.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: