Solved: QOS Guide - Cisco 6504 with supervisor 2T

PNW Weer · ‎06-28-2017

Hi

Please let me know valid qos design guide for the Cisco 6504 switch with SUP 2T, I am struggling to find good document related to following queuing system.

6504#show version
Cisco IOS Software, s2t54 Software (s2t54-IPSERVICESK9-M), Version 15.2(1)SY3, RELEASE SOFTWARE (fc3)

----------------

6504#show module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 5 Supervisor Engine 2T 10GE w/ CTS (Acti VS-SUP2T-10G

3 24 CEF720 24 port 1000mb SFP WS-X6824-SFP

----------------

Interface quequing,

6504#show queueing interface tenGigabitEthernet 1/4 | include type
Transmit queues [type = 1p3q4t]:
Receive queues [type = 2q4t]:

6504#show queueing interface GigabitEthernet 3/1 | include type
Transmit queues [type = 1p3q8t]:
Receive queues [type = 2q8t]:

thanks

Reza Sharifi · ‎06-28-2017

Hi,

Here is a good white paper and the config guide for the sup-2T architecture.

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-6500-series-switches/white_paper_c11-652042.html

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/15-0SY/configuration/guide/15_0_sy_swcg/qos_global_and_if.html

HTH

View solution in original post