Big question: Does the config below work? My stress tests shows its utilizing the bandwidth commands, but thats about all I can tell. I am unexpereienced with QoS. Help please!
Two branch locations that use MPLS to connect to a datacenter, and route to the internet through a hosted firewall at the datacenter. Configuration example below is from a branch MPLS router. Branch uses VOIP and some Core Vendor software (extremely network sensitive).
So the branches connect to each other and the internet via each of their MPLS routers (Cisco 1841's).
We want to accept any critiques, and know if the config below would work in general/at all. In particular I would like to ensure the Core Vendor traffic never drops/has too high of a latency.
In the current configuration I saw just 4 packets drops for the Core Vendor due to WRED attempting to avoid congestion.
Note: We set the DSCP values we do because those are the DSCP values that correspond to our ATT MPLS CoS values.
“Catalyst 8500 Series - Deep Dive”
This event will have place on Tuesday 17th, November 2020 at 10hrs PDT
The Catalyst 8500 Series Edge Platforms are built with the highly programmable, third-generation Cisco Quantum Flow Processor and designed for ...
“Catalyst 8000 Edge Platforms Family Overview”
This event will have place on Wednesday 4th, November 2020 at 10hrs PDT
Designed for an intent-based networks, the Cisco Catalyst 8000 Edge Platforms family offers best-in-class networking and security ...
I'm currently redistributing OSPF to BGP and setting a local pref on the routes. Currently this works fine and having no issues. ip prefix-list ospf-routes seq 10 permit 172.16.100.0/24
route-map ospf-bgp permit 10
match ip address prefix-list ...
Cisco SD-WAN Cloud OnRamp allows you to simplify and secure connectivity to cloud applications and public clouds. Interested in testing out the latest Cisco Cloud OnRamp solutions?
Sign up to try out various use cases with the Cisco SD-WAN Cloud ...
“Use Serviceability Features to Troubleshoot your Cat9K as a Cisco TAC Engineer”
This special event is open only to Cisco Customers and Partners.
Many pages in the Cisco Community are accessible only to Cisco customers, partners, or logged in ...