cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
381
Views
0
Helpful
4
Replies
shoaibjafri
Beginner

QOS on the Switch to rate limit servers during different time frames

Hi,

I have three servers in same vlan/subnet and want to rate limit these servers like

"Configure QOS on the Swicth to rate limit the server:

11:00pm to 11:00am maxminum 190Mbps

11:00am to 11:00pm max 90Mbps "

Kind Regards,

Jafri

4 REPLIES 4
shoaibjafri
Beginner

Please help me if you have any example config or cisco document.

Thanks

Jafri

Joseph W. Doherty
Hall of Fame Expert

Disclaimer

The  Author of this posting offers the information contained within this  posting without consideration and with the reader's understanding that  there's no implied or expressed suitability or fitness for any purpose.  Information provided is for informational purposes only and should not  be construed as rendering professional advice of any kind. Usage of this  posting's information is solely at reader's own risk.

Liability Disclaimer

In  no event shall Author be liable for any damages whatsoever (including,  without limitation, damages for loss of use, data or profit) arising out  of the use or inability to use the posting's information even if Author  has been advised of the possibility of such damage.

Posting

Might be doable with a time based ACL.

with time based ACL I need to use rate limit but on 6509 there is no  rate-limit command.

Disclaimer

The   Author of this posting offers the information contained within this   posting without consideration and with the reader's understanding that   there's no implied or expressed suitability or fitness for any purpose.   Information provided is for informational purposes only and should not   be construed as rendering professional advice of any kind. Usage of  this  posting's information is solely at reader's own risk.

Liability Disclaimer

In   no event shall Author be liable for any damages whatsoever (including,   without limitation, damages for loss of use, data or profit) arising  out  of the use or inability to use the posting's information even if  Author  has been advised of the possibility of such damage.

Posting

http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND_40/QoSCampus_40.html#wp1120182