02-20-2018 04:06 AM - edited 03-08-2019 01:56 PM
Hi guys,
Im not up to much on the QOS side and we are changing all our old Cisco edge switches for a new vendor. I have a policy map that do not seem to be applied to anything, also a class map that doesn't seem to do anything either just wanted someone to looks and see if im right.. ?
There are no access lists with any of these names, and the policy map is not applied to any interface on the switch.
class-map match-all BULK
match access-group name BULK
class-map match-all MISSION_CRITICAL
match access-group name MISSION_CRITICAL
class-map match-all CALL_SIGNALLING
match access-group name CALL_SIGNALLING
class-map match-all PRIORITISED
match access-group name PRIORITISED
class-map match-all NMS
match access-group name NMS
class-map match-all VIDEO
match access-group name VIDEO
class-map match-all VOICE
match access-group name VOICE
end
policy-map XYZ_CLASSIFICATION
class VOICE
set dscp ef
class CALL_SIGNALLING
set dscp cs3
class VIDEO
set dscp af41
police 10000000 8192 exceed-action drop
class MISSION_CRITICAL
set dscp af31
police 5000000 8192 exceed-action policed-dscp-transmit
class PRIORITISED
set dscp af21
police 5000000 8192 exceed-action policed-dscp-transmit
class NMS
set dscp cs2
police 5000000 8192 exceed-action policed-dscp-transmit
class BULK
set dscp af11
police 5000000 8192 exceed-action policed-dscp-transmit
class class-default
set dscp default
police 5000000 8192 exceed-action policed-dscp-transmit
!
end
Solved! Go to Solution.
02-20-2018 04:21 AM
02-20-2018 04:21 AM
02-20-2018 04:26 AM
02-20-2018 04:30 AM
02-20-2018 04:39 AM
02-20-2018 05:04 AM
its a 2960X
@Mark Malone wrote:
what platform are you taking that extract from ?
This is the MLS QOS configuration
mls qos map policed-dscp 0 10 16 18 24 26 to 8
mls qos map cos-dscp 0 8 16 24 32 46 48 56
mls qos srr-queue output cos-map queue 1 threshold 3 4 5
mls qos srr-queue output cos-map queue 2 threshold 1 2
mls qos srr-queue output cos-map queue 2 threshold 2 3
mls qos srr-queue output cos-map queue 2 threshold 3 6 7
mls qos srr-queue output cos-map queue 3 threshold 3 0
mls qos srr-queue output cos-map queue 4 threshold 2 1
mls qos srr-queue output dscp-map queue 1 threshold 3 34 46
mls qos srr-queue output dscp-map queue 2 threshold 1 16 18
mls qos srr-queue output dscp-map queue 2 threshold 2 24 26
mls qos srr-queue output dscp-map queue 2 threshold 3 48 56
mls qos srr-queue output dscp-map queue 3 threshold 3 0
mls qos srr-queue output dscp-map queue 4 threshold 1 8
mls qos srr-queue output dscp-map queue 4 threshold 2 10
mls qos queue-set output 1 threshold 2 70 80 100 100
mls qos queue-set output 1 threshold 4 40 100 100 100
mls qos queue-set output 1 buffers 15 20 45 20
mls qos
02-20-2018 05:14 AM
02-20-2018 05:37 AM
02-20-2018 05:56 AM
So in a nutshell..
The L2 QOS is enabled and active. the Policy map and class maps are redundant, this makes sense as its only an L2 switch.
The environment has many legacy issues, so when we move onto the new vendor only L2 QOS will be required.
02-20-2018 06:39 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide