QSFP-4X10G-AOC10M

[ayakoleb]

Hello Colleagues ,

I have a cable QSFP-4X10G-AOC10M that i need to connect the 40G port to 3850-48xs and use 2 of the 10G ends , 1x10G to be connected to 3850-24xs and 1X10G to a controller 5520?

datasheet stated that These breakout cables connect to a 40G QSFP port of a Cisco switch on one end and to four 10G SFP+ ports of a Cisco switch on the other end

the question is , for the 40G interface , How will be the configration?

thanks to Help .

[Reza Sharifi]

Hi,

According to the data matrix sheet, the AIR-5520 supports this cable.

See the link and just search for 5520.

https://tmgmatrix.cisco.com/?si=5520

https://tmgmatrix.cisco.com

HTH

[ayakoleb]

thanks for your reply , 

yes , I checked that controller support this cable ,

my question more related to the configartion for the cable .as from the 40G  interface , how i shall configure two different 10G interfaces with different configrations .

---

@Reza Sharifi wrote:

Hi,

According to the data matrix sheet, the AIR-5520 supports this cable.

See the link and just search for 5520.

https://tmgmatrix.cisco.com/?si=5520

https://tmgmatrix.cisco.com

HTH

---