question about transport input command

[nygenxny123]

transport input telnet

will only allow telnet

transport input ssh

will allow only ssh

transport input telnet ssh

will only allow telnet and ssh

what will the default do?

as opposed to the transport input all?

[Edison Ortiz]

The default is 'none'

http://www.cisco.com/en/US/docs/ios/termserv/command/reference/tsv_s1.html#wp1022885

HTH,

__

Edison.

[nygenxny123]

is the default dependant on the IOS?

this is the running config from a cat switch.

it appears to be at default..

but if it was none, i shouldn't be able to telnet ..right?

line con 0

privilege level 15

line vty 0 4

privilege level 15

line vty 5 15

privilege level 15

yet i can telnet to it,

Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(35)SE5, RELEA

SE SOFTWARE (fc1)

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Thu 19-Jul-07 20:06 by nachen

Image text-base: 0x00003000, data-base: 0x00D40000

[Edison Ortiz · Accepted solution]

Richard,

You are indeed correct. That section of the documentation needs to be updated. It does mention in the 'Usage Guidelines' that the default 'none' applies to TTY connections but there is no mention of VTY connections.

I did a little digging and it seems the VTY connections default is set to 'all' but the documentation makes no mention of it.

__

Edison.

[nygenxny123]

great thx!!