"Configuring a Basic MPLS VPN" Document ID:13733. First question :)

[fornax]

Hi guys, 

I take first steps to learn MPLS. Need some clarification with that document:

https://www.cisco.com/c/en/us/support/docs/multiprotocol-label-switching-mpls/mpls/13733-mpls-vpn-basic.html

In the physical topology, there is 11 routers. But logicly, I can count only 10 of them. 

What I'm doing wrong and how to name my PE routers? 

Respectfully, 

[omz]

Are you looking at the right diagram? “This document uses this network setup:”

Second diagram has 10 routers. For lab, you can name the P/PE as in the diagram I guess.