08-16-2016 02:44 PM - edited 03-08-2019 07:01 AM
I have an ISR4331 running IOS XE 3.16.3S with IOS 15.5(3)S3. The "show control-plane host open-ports" command (very useful for showing what ports the router is listening on) is an unrecognized command. Also, the "control-plane host", "control-plane cef-exception" and "control-plane transit" configuration commands are not recognized configuration commands. Have these commands been replaced with different commands in IOS XE? I have a ISR3925 router running IOS 15.4(3)M4 and the commands are available on this platform.
Solved! Go to Solution.
08-16-2016 05:10 PM
can you try "show ip ports"?
08-16-2016 05:10 PM
can you try "show ip ports"?
08-24-2016 12:34 PM
router#show ip ports
% Incomplete command.
08-24-2016 04:49 PM
10-13-2016 09:04 PM
That command only seems to show the ephemeral-max ports. Any other suggestions?
Router#sh ip ports ?
ephemeral-max Show maximum limits for ephemeral ports on IOS
Router#sh ip ports ephemeral-max
Maximum limit for Ephemeral ports on IOS: 65535
05-22-2017 04:17 AM
Try "show ip sockets "
#show ip sockets
Proto Remote Port Local Port In Out Stat TTY OutputIF
17 224.0.0.251 5353 --any-- 5353 0 0 2000021 0
17(v6) FF02::FB 5353 --any-- 5353 0 0 2020021 0
17 XXXX 44863 XXXX 161 0 0 2001001 0
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide