cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
4957
Views
5
Helpful
5
Replies
CHRISTINE BERNS
Beginner

"show control-plane host open-ports" command missing in IOS XE 3.16.3S with IOS 15.5(3)S3 ?

I have an ISR4331 running IOS XE 3.16.3S with IOS 15.5(3)S3. The "show control-plane host open-ports" command (very useful for showing what ports the router is listening on)  is an unrecognized command. Also, the "control-plane host",  "control-plane cef-exception" and "control-plane transit" configuration commands are not recognized configuration commands. Have these commands been replaced with different commands in IOS XE?  I have a ISR3925 router running IOS 15.4(3)M4 and the commands are available on this platform.

1 ACCEPTED SOLUTION

Accepted Solutions
Furose M
Participant

can you try "show ip ports"?

View solution in original post

5 REPLIES 5
Furose M
Participant

can you try "show ip ports"?

View solution in original post

router#show ip ports
% Incomplete command.

whats after ports? if you do "show ip ports ?"

That command only seems to show the ephemeral-max ports. Any other suggestions?

Router#sh ip ports ?
  ephemeral-max  Show maximum limits for ephemeral ports on IOS

Router#sh ip ports ephemeral-max
Maximum limit for Ephemeral ports on IOS: 65535

Samuel Miruka
Beginner

Try "show ip sockets "

#show ip sockets
Proto Remote Port Local Port In Out Stat TTY OutputIF
17 224.0.0.251 5353 --any-- 5353 0 0 2000021 0
17(v6) FF02::FB 5353 --any-- 5353 0 0 2020021 0
17 XXXX 44863 XXXX 161 0 0 2001001 0