"SNMP-3-INPUT_QFULL_ERR: Packet dropped due to input queue full" Error

[recep_ali_sevim]

Hi,

I have a 6807-XL and nowadays device's cpu is using high CPU. I checked logging in the device and I saw this error. If I remove Snmp-server configuration from device, CPU work normally. But I need SNMP....

I run "show snmp" command. Maximum queue size is 1000 but there is 1200254 queue in the device.

How can I solve that problem? I found a solution but there are links have broken.

[marce1000]

 - Could be a bug , check current software version that the 6807 is using  , use an advisory release (if applicable) , check if  that can help.

 M.

[recep_ali_sevim]

I will check tomorrow and I will reply 

[balaji.bandi]

check this thread - reported number bugs reported :

https://community.cisco.com/t5/switching/snmp-sw1-3-input-qfull-err-packet-dropped-due-to-input-queue/td-p/2272033?utm_source=bugqv&utm_content=https://bst.cloudapps.cisco.com/quickview/bug/CSCsm80154

upgrade IOS to stable where possible.

[recep_ali_sevim]

How can I see thread numbers?

[balaji.bandi]

i mean many bugs reported. what is the version of code running ? check against ? or use snmpv2

[recep_ali_sevim]

I checked snmp groups and I saw v1 and v2c 

[balaji.bandi]

I checked snmp groups and I saw v1 and v2c 

what does this mean? more explanation will be helpful here.

[Georg Pauwen]

Hello,

post the output of:

sh ver

sh run